Self-Priming Utility Pump

Model 81 1/4B3-E.33 1P

Model 81 1/4B3-E.33 1P is designed for applications requiring high volume, low pressure, sump or liquid transfer. The copper alloy semi-open impeller handles solids to 5/16" diameter. Built-in flapper/check valve enables consistent self-priming to 20 ft. Included with the pump are a suction strainer, float switch, and an eight foot power cord. Motor is 1/3 horsepower.

*Viton® is a registered trademark of DuPont

DIMENSIONS: INCHES

[MILLIMETERS]

MODEL A B C D E** F G H J K SUCT* DISCH* L
81 1/4B3-E.33 1P 2.44 [62.0] 6.50 [165.1] 4.62 [117.3] 7.19 [182.6] 14.32 [363.7] 3.00 [76.2] 6.69 [169.9] 4.00 [101.6] 3.25 [82.6] 3.50 [88.9] 1.25 1.25 1.22/[31.0] X .34/[8.6] SLOT 4 PLACES

(*) STANDARD NPT PIPE THREADS. (**) DIMENSION MAY VARY WITH MOTOR MANUFACTURER.

Cast iron construction with copper alloy impeller Maximum suction lift 20 Ft.
1-1/4" NPT suction and discharge ports Maximum operating pressure 26 PSI
1/3 HP ODP Motor with 8 ft. 115 VAC power cord Maximum temperature 160˚ F
Includes float switch and strainer Viton®* mechanical seal
Built-in flapper valve “Off-the-Shelf” availability
Model No. Description/ Type of Pump Ship Wt (Lbs.) Driver Type & HP Port size Suc x dis (NPT) Basic Construction Seal Type & Elastomer/ Faces VAC FL Amps Motor Enclosure
81 1/4B3-E.33 1P Self-Priming Utility Pumps 42 Elect. Motor 0.33 HP 1 1/4" x 1 1/4" Gray Iron Viton®* Carbon Ni-resist 115/230 60hz ODP

*Viton® is a registered trademark of DuPont

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids.

See price book page 17 The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. CP49-500/0904