The Gorman-Rupp 12 volt submersible pump is designed for use with a truck
battery, as a back-up unit in the event of power failure, or for use in remote
locations where electricity is not available.
Operating time is approx. 45 minutes on a fully-charged 55 amp battery.
Gorman-Rupp submersible pumps are well suited for pumping out flooded
basements, pools, spas, pits, or anywhere else where the pump can be lowered
into the water.
The 30-foot power cord allows the pump to be lowered into areas a
self-priming pump with a suction hose could not readily access.
Gorman-Rupp submersible pumps are well suited for pumping out flooded
basements, pools, spas, pits, or anywhere else where the pump can be lowered
into the water.
The 50-foot power cord allows the pump to be lowered into areas a
self-priming pump with a suction hose could not readily access.
Gorman-Rupp submersible pumps are well suited for pumping out flooded
basements, pools, spas, pits, or anywhere else where the pump can be lowered
into the water.
The 50-foot power cord allows the pump to be lowered into areas a
self-priming pump with a suction hose could not readily access.
Gorman-Rupp submersible pumps are well suited for pumping out flooded
basements, pools, spas, pits, or anywhere else where the pump can be lowered
into the water.
The 50-foot power cord allows the pump to be lowered into areas a
self-priming pump with a suction hose could not readily access.
Little Giant VCL-45ULS (553240) 1/5HP Condensate Removal Pump features Safety Switch, 1 gallon ABS tank., 6ft power cord and 3/8" O.D. copper tube discharge. Included Safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
Cast Aluminum Casing and Adapter
Cast Iron Seal Plate, Volute and Manifold
Stainless Steel Impeller
Silicon Carbide Mechanical Seal and Buna-N O-Rings and Check Valve
6" NPT Port Size
Self-Priming to 20 Feet
Maximum Solids Handling 3"
Patented Unique Slide MechanismPermits Complete Service of Pump Without Removing Hoses or Removing Pump Components from Trailer
Seal Wash Feature for Extended Seal Life
The AMT 6" Engine Driven Trash Pump is designed for applications requiring high volume flow and solid/debris handling capabilities. Pump is constructed of heavy duty sand cast aluminum with cast iron and stainless steel internal parts for wear resistance and durability. Patented built-in slide mechanism features nylon and powder coated steel components that permit servicing, repairing and cleaning entire pump without removing hoses or pump components from trailer. Digital tachometer/hourmeter installed. Requires 12 Volt Battery: BCI Group 24, Minimum of 500 CCA (Cold Crank Amps) Battery Box Cables Setup for Automotive Post Type Connection.
Cast Aluminum with Cast Iron Wearparts
Viton®/Silicon Carbide Mechanical Seal & Buna-N O-Ring/Gasket
3" & 4" Cast Iron Male Port Sizes with 90° Rotatable Discharge Port
Self-Priming up to 20 Feet with Built-In Buna-N Check Valve
3" Models Featured in Heavy Duty Steel Roll Frame
Maximum Solids Handling up to 1-1/2"
Include Front Cleanout with Cast Aluminum Handles
AMT Engine Driven Trash pumps are designed for applications which require high flow efficiency and solid handling capability. These pumps are constructed of heavy duty sand cast aluminum components featuring removeable/replaceable cast iron volutes, impellers and wearplates. Simple cleanout design permits easy removal of trash and debris without disconnecting hoses. Cast iron discharge port rotates in 90° increments. An electric start option is available on many models.
Cast Aluminum with Cast Iron Wearparts
Viton®/Silicon Carbide Mechanical Seal & Buna-N O-Ring/Gasket
3" & 4" Cast Iron Male Port Sizes with 90° Rotatable Discharge Port
Self-Priming up to 20 Feet with Built-In Buna-N Check Valve
3" Models Featured in Heavy Duty Steel Roll Frame
Maximum Solids Handling up to 1-1/2"
Include Front Cleanout with Cast Aluminum Handles
AMT Engine Driven Trash pumps are designed for applications which require high flow efficiency and solid handling capability. These pumps are constructed of heavy duty sand cast aluminum components featuring removeable/replaceable cast iron volutes, impellers and wearplates. Simple cleanout design permits easy removal of trash and debris without disconnecting hoses. Cast iron discharge port rotates in 90° increments. An electric start option is available on many models.
Cast Iron Construction with Stainless Steel Closed Impellers
Buna-N Mechanical Seal and O-Ring
1-1/2" NPT Port Size
Self-Priming - Requires Foot Valve (included) above 10 Ft.
Engine Options: Honda or Briggs and Stratton
Maximum Flow up to 68 GPM
Maximum Head up to 90 PSI
Heavy Duty Steel Roll Frame Included
Wheel Kit Available
The AMT line of Engine Driven High Pressure pumps is designed for lawn sprinkling, agricultural spraying, dewatering, fire fighting, emergency water supply and pressure boosting. Two-stage models feature cast iron diffusers and 300 series stainless steel investment cast impellers for high efficiency producing up to 90 PSI that generally requires 8 horsepower or more from a single stage pump. Pumps offer a broad selection of gasoline engines from the leading engine manufacturer with dependable service worldwide. All models include: cast iron pipe nipples, 90° discharge elbow, strainer/foot valve and rugged heavy duty steel roll frame for protection and durability.
Cast Iron Construction
Viton® /Silicon Carbide Mechanical Seal
2" NPT Sizes
Self-Priming up to 20 Feet with Built-In Viton® Check Valve
Engine Options: Honda, Briggs & Stratton or Hatz Diesel
Heavy Duty Steel Roll Frame Included
Maximum Solids Handling up to 1" Diameter
Maximum Head up to 105 Ft.
Maximum Flow up to 185 GPM
Optional Wheel Kit Available
AMT Cast Iron Engine Driven Trash pumps are designed for applications which require high flow efficiency, solids handling capability and abrasion resistance. This series of pumps are also good for chemical spraying, handling and processing. These pumps are constructed of heavy duty CNC machined cast iron components featuring removable/replaceable cast iron volute and impeller. Simple four bolt clean out design permits easy removal of trash and debris without disconnecting hoses. Pumps are available with gasoline overhead valve or diesel engines from various engine manufacturers.
Cast Aluminum Casing and Adapter
Cast Iron Seal Plate, Volute and Manifold
Stainless Steel Impeller
Silicon Carbide Mechanical Seal and Buna-N O-Rings and Check Valve
6" NPT Port Size
Self-Priming to 20 Feet
Maximum Solids Handling 3"
Patented Unique Slide Mechanism Permits Complete Service of Pump Without Removing Hoses or Removing Pump Components from Trailer
Seal Wash Feature for Extended Seal Life
The AMT 6" Engine Driven Trash Pump is designed for applications requiring high volume flow and solid/debris handling capabilities. Pump is constructed of heavy duty sand cast aluminum with cast iron and stainless steel internal parts for wear resistance and durability. Patented built-in slide mechanism features nylon and powder coated steel components that permit servicing, repairing and cleaning entire pump without removing hoses or pump components from trailer. Digital tachometer/hourmeter installed. Requires 12 Volt Battery: BCI Group 24, Minimum of 500 CCA (Cold Crank Amps) Battery Box Cables Setup for Automotive Post Type Connection.
• Cast Iron Construction for Abrasive Resistance and Durability • Silicon Carbide/Viton? Mechanical Seal • Buna-N Check Valve and O-Ring • Self-Priming to 20 Ft. • Stainless Steel Semi-Open, Clog Resistant Impeller • Easy Cleanout Design - Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
